The SIG-551-SWAT
SIG's SG 551-SWAT is a gas-operated weapon conceived
specifically for special forces and elite units. Incorporating synthetics and
corrosion-resistant materials, it is highly suitable for maritime engagements.
The weapon is based on the proven design concepts of the SG 551 (SG is an
abbreviation for Sturmgewehr, or assault rifle) and is extremely compact. The
optimal layout and outstanding weight distribution provide convincing accuracy
and recoil characteristics.
The SG 551-SWAT is equipped with a highly tested and accurate sighting system.
A combined diopter and snapsight shooting assembly is mounted on the receiver
housing and calibrated for selected ranges. This rear sight resembles that
found on HK rifles and submachineguns, and it is adjustable for both windage
and elevation. It is also equipped with tritium-illuminated markings for night
firing. The front sight is equipped with a protective hood and a flip-up night
sight that is also illuminated with tritium. A universal scope mount is
available for the SG 551-SWAT that accepts a wide range of sighting aids such
as night-vision equipment, Trijicon ACOGs and other STANAG-based optics
without the need for special tools or adapters. A universal fitting on the
foresight mount accepts special equipment such as bipods or laser sighting
aids and provides a safe means of attaching the weapon in transport vehicles.
All components of the SG 551-SWAT are manufactured to withstand the rigors of combat in any environment. Exposed steel parts such as the upper/lower receiver, sights, magazine release and trigger are coated in plastic to resist corrosion. The folding buttstock, pistol grip, handguards and magazine are all manufactured from high-impact synthetics. The gas system's components are made of stainless steel. The barrel, bolt, carrier, and firing pin are all made with steel that has been gas nitrided, hardened and tempered. The bolt and carrier, along with most other components internal to the receivers, undergo a special phosphating procedure. The result of SIG's engineering is a rifle that is especially suited for tropical and maritime operations.
detail 551-SWAT fitted with laser

Here Below the owners nice 3some


The C-MAG system from betaco 100 rounds

The owner of this website having fun with his 551-1
( 7th place of 75 contesters not bad for a amature;-)
2.3Mb file the sig 551-1 swat
sigswat551

Sometimes it is difficult to chose

A.C.O.G.
Advanced Combat Optical Gunsight - The tactical
advantage for precision sighting in any light. Initially designed for the
M16 family, every feature of the ACOGs mechanical and optical design was chosen
for a single purpose - to provide increased hit potential in all lighting
conditions. The exterior of the ACOG is a forged aluminum body (aircraft
strength 7075 alloy) which is precision machined to exacting tolerances then
hard-anodized. ACOG’s are internally-adjustable, compact telescopic
sights that use tritium illuminated reticles for target acquisition in all light
conditions - even total darkness. Manufactured and tested to exceed
military standards, The ACOG 4x32 model was chosen by U.S. Special Operations
Command for all Special Forces Units including Navy Seals, Rangers, and Green
Beret. The ACOG is also in service with many federal, state and local
law-enforcement agencies. ACOG gives you the edge in any light to keep
your focus sharp. Both full size ACOG models (4x32 & 3.5x35) are
available with the popular Bindon Aiming Concept which is achieved using a
unique combination of advanced fiber optics and self-luminous tritium.
Using dual-illumination technology, originally developed for the military and
proven in combat, the fiber optic light collector illuminates the aiming point
automatically balancing the brightness with the shooting conditions. The
tritium illuminates the aiming point even in total darkness. The result:
lightening-fast precision aiming in any light without failure-prone batteries -
for maximum shooting success.
A look trough the Trijicon Acog type TA01C target distance 100 mtr./300 yards aprox.
|
|
![]() |
The SIG-SAUER p-226
|
Specifications |
Model SIG SAUER P226 - 83 to Present - Mechanically-Locked, Recoil-Operated, Semiautomatic Full Sized Pistol. |
|
Trigger: |
Double-Action /Single-Action or Double-Action Only. |
|
Safety System: |
Patented automatic firing-pin lock. |
|
Calibers: |
9 mm - .357 SIG - .40 S&W |
|
Length: |
7.7 inches |
|
Height: |
5.5 inches |
|
Width: |
1.5 inches |
|
Barrel Length: |
4.4 inches in all calibers. |
|
Rifling Twist: |
9 mm 1 in 10" |
|
.357 SIG 1 in 16" |
|
|
.40 S&W 1 in 15" |
|
|
Rifling Grooves: |
6 |
|
Sight Radius: |
6.3 inches |
|
Weight w/o Magazine: |
9mm = 26.5 oz. |
|
357 SIG = 30.6 oz. |
|
|
40 S&W = 30.6 oz |
|
|
Weight, Empty Magazine: |
3.4 oz. |
|
Trigger Pull Weight: |
DA 10 lbs SA 4.5 lbs. |
|
Magazine Capacity Type: |
10 Rounds Double Stack |
|
*LEO Mags |
15 rounds 9mm |
|
**Hi Cap Note: |
Pre Ban Hi Cap Mags are Widely Available. |
|
Accessories: |
Sight pusher, Walnut Grips, extra magazines, cleaning kit, SIGLITE night sights, 3-Dot sights, padded floorplate, short trigger, carrying case. |
|
Finish: |
SIG P226 available in SIG Blue/Blackened Stainless Steel Slide, K-Kote or Two-Tone. |
